Chiarugi 47 2 oboe staple.
The Chiarugi 47 2 oboe staple is a 47 mm type 2 brass staple. It is the metal tube onto which shaped cane is tied to make an oboe reed.
The Chiarugi 2 is the best-selling oboe staple in the world. In the 47 mm length, it works as the standard reference: a clear and familiar base for starting reed making.
If you want to work from a common length before testing shorter staples, this is the base model in the Chiarugi 2 family.
A reference point for making oboe reeds.
The 47 2 is not intended as an extreme pitch correction. Its role is to offer a neutral starting point for tying, comparing and adjusting reeds with control.
From that base, the final result depends on the cane, tying, scrape, embouchure, oboe and the player’s skill.
That is why it is usually the first length worth having on the workbench: it lets you understand what the reed is doing before looking for shorter solutions.
Who is this staple for?
The Chiarugi 47 2 is especially suitable if you already work with 47 mm staples or if you want to start from the standard oboe length.
It is also a good option if your reeds do not clearly tend to sit low and you prefer to adjust response through scraping, tying and the final reed length.
If your oboe and reed setup usually sits low, compare it afterwards with a shorter length such as the Chiarugi 46 2 or the Chiarugi 45 2.
Comparison with other lengths.
Staple length is felt quickly in the general pitch of the reed. As a practical rule, the shorter the staple, the more the reed tends to rise in pitch.
| Model | Length | Use profile | Usual effect |
|---|---|---|---|
| Chiarugi 47 2 | 47 mm | Standard length | Neutral reference for starting reed making. |
| Chiarugi 46 2 | 46 mm | Intermediate option | Helps raise the pitch slightly. |
| Chiarugi 45 2 | 45 mm | Short option | Helps raise the pitch more noticeably. |
Material and construction.
The Chiarugi 47 2 is made of brass, a classic material for oboe staples. Its shape allows stable tying and precise sealing work on the reed.
Type 2 identifies the model within the Chiarugi range. It does not indicate the final hardness of the reed, which depends on the cane, shape, tying and scrape.
Opening dimensions.
These measurements help identify the Chiarugi type 2 profile. Use them as a technical reference for comparing models and preparing your reeds.
| Measurement | Description | Value |
|---|---|---|
| Length | Total staple length. | 47 mm |
| Top opening horizontal | Major diameter of the oval where the cane is tied. | 2.4 mm |
| Top opening vertical | Minor diameter of the oval where the cane is tied. | 1.9 mm |
| Bottom opening | Round diameter of the part inserted into the oboe staple socket. | 4.6 mm |
| Wall thickness | Approximate wall thickness of the staple. | 0.20-0.30 mm |
Practical advice from EG-REEDS.
If a 47 mm staple still leaves you low in pitch, do not solve it by pulling the staple out of the oboe staple socket. Pulling it out creates an internal step that can disturb sound and overall intonation.
The cleaner solution is to review reed length, adjust the scrape or try a shorter staple such as the 46 2 or the 45 2.
Complete your staple.
To make a complete reed you need, in addition to the staple, shaped oboe cane, tying thread and the final scrape or adjustment.
You can combine this staple with EG-REEDS shaped oboe cane, explore the oboe staples category or complete your workbench with the Chiarugi oboe mandrel.
Frequently asked questions
What do I need besides the staple?
You need suitable oboe cane, tying thread and the final scrape or adjustment of the reed.
What does Chiarugi 47 2 mean?
It indicates a 47 mm, type 2 Chiarugi staple. It is the standard length within this family of oboe staples.
Why choose 47 mm?
Because it is the standard reference for starting reed making. If you later need to raise pitch, you can compare it with 46 mm or 45 mm.
Can it help if my reed sits low?
If the reed often sits low, you may need a shorter length. In that case, check the Chiarugi 46 2 or the Chiarugi 45 2.
What if my reed sits high?
The 47 2 is usually a better starting point than a short staple. If it still sits high, review reed length and scrape.
Does type 2 indicate hardness?
No. Type 2 identifies the model within the Chiarugi range. Final hardness depends on the cane, tying, scrape and adjustment.
Are the measurements exact?
They are reference measurements for the model. As with any staple, small manufacturing or measuring tolerances can exist.
Can I use it for English horn or oboe d’amore?
No, it is only for oboe.
What is the difference from 46 2 or 45 2?
The main difference is length. The 47 2 is the standard length. The 46 2 is an intermediate option. The 45 2 helps raise the pitch even more.













